The Article
YAMAHA’S WXC-50 & WXA-50: AMPLIFIERS…From Any Angle
27th November 2016
A pair of rinky, dinky amplifiers from Yamaha offer just enough facilities for a small footprint chassis, including MusicCast. Paul Rigby reviews the WXC-50 pre-amplifier and the WXA-50 integrated amplifier
Both of these amplifiers arrive in an almost identical chassis, giving the pair a distinct ‘family’ resemblance that will allow both to easily fit into a living room environment. Both arrive with MusicCast Wi-Fi streaming as standard and come with a 48bit digital volume control. Both can also be mounted vertically to further minimise the overall footprint. They also support AirPlay and, where available, Spotify, Napster, Sirius XM, Juke and Pandora as well as DSD 5.6MHz and FLAC/WAV/ AIFF 24bit/192kHz. Finally, they both span 215 x 51.5 x 245.9mm.
The first of the two amp boxes, the WXC-50 pre-amplifier. You can also turn off the Pre-amp mode and use the device as a simple network audio player. This box weighs 1.44kg. The 70W WXA-50 weighs in at 1.94kg. Check out the accompanying images to see a rundown of controls, sockets et al. The aerial is the home of the screw-in, multi-position, Wi-Fi aerial.
IN USE
To play the USB stick of digital files, I decided to download and install the associated and in-house developed MusicCast app on my iPhone 6S. USB file control was a lot friendlier via the app than punching buttons on a chassis and hoping for the best. Download and software installation was easy but the final set-up was overly difficult. It took me around 20 minutes when it really should have taken me, what, three?
MusicCast is not a Bluetooth system but utilises a Wi-Fi connection. To install it, you press the Connect button on the front of either chassis for five seconds until the adjacent connection light flashes. Then you open the app itself and follow the onscreen prompts which involves bouncing between it and the phone’s Wi-Fi Settings screen. In that Settings screen, you wait for the MusicCast option to appear as one of the choices within the available local Wi-Fi connections list. Well it did, eventually. Nothing was seen until my third try but I finally connected without a problem once it made an appearance.
Back to the app but my trial was not yet over. The app failed to complete the install sequence another three times but I got there at the fourth attempt. Why these issues occurred can only be conjecture. Was it down to my phone? Was it Yamaha’s fault? Was it something to do with my Wi-Fi signal? Was it something else? I can only say that no other, non-Yamaha, device had issues in my listening room or anywhere else in the building at this time.
Nevertheless, once connected and installed, the app worked flawlessly. It showed the song title, sleeve art (not for WAV rips though), CD-type music controls plus EQ controls. My only gripe is that I would have like to have seen a report on the quality of the file type being played. For example, when playing the jazz piece, St. Thomas from Sonny Rollins, this is a 24bit/96kHz file but this information was never revealed by the app. I wish I could have seen that information on the app screen. I don’t mind the lifestyle facade that Yamaha is trying to promote here. I can even live with the irritatingly Apple-like paternalistic ‘we’ve-decided-that-you-don’t-need-the-information-so-we-won’t-give-it-to-you’, non-techie approach to the app but it would have been nice to have found the said figures buried somewhere, for those who really want it.
SOUND QUALITY
I began the sound tests playing a the CD version of Earth, Wind & Fire’s Let’s Groove. This group was a busy outfit on stage and within their arrangements. There is plenty going on here and it takes quite an amplifier to sort everything out. Even behind the conglomeration of the principle voices and instruments, there are plenty of subtle and tiny effects that pop up here and there.
Have you ever seen those word association tests that psychologists use to diagnose the mental state of a patient? You say ‘good’, I say bad. You say ‘black’, I say ‘white’, you say ‘The Himalayas’, I say ‘Marilyn Monroe’. You know the sort of thing. Well, if you said, ‘bass’, I would say ‘Yamaha’. Such is the company’s reputation and concentrated effort to effect a low frequency-based personality. If any knows how to ‘do’ bass, Yamaha’s yer man.
Through the WXA-50, I was most impressed by that signature Yamaha bass. Impressed, not because there was a lot if it – there was – but because of how the bass power was integrated within the soundstage. The amount of focus placed upon the bass gave it a sharp, short, ‘bam!’ of an arrival. The punch was in then out in a jiffy, giving the bass a tremendous transient speed and response that provided drive to the entire track. The tightness of the bass was allied to its careful positioning in the soundstage. There was no hint of blooming or any threat of it infecting the midrange. This meant that secondary percussion, such as wooden block strikes, on the track My Love from the same group, where not only recognisable but also integrated their own reverb tails. Any bass smearing at all would have veiled such delicacies.
Midrange was incisive, for the price, digging out all of those little sound effects that I mentioned above, allowing the ear to seek them out without too much trouble. Yes, there was a slight spotlight shining on the upper mids during vocal crescendos but mainly at high volumes. It wasn’t a big problem, though. For the most part, I enjoyed the tremendous clarity that the midrange afforded and, for the price, the detail that it presented.
Turning to Sonny Rollins and his track, St. Thomas running via the USB port from a USB stick at 24bit/96kHz and controlled via the MusicCast app, I was impressed by the midrange insight that, for the price, provided space and air for the complex percussive sequences on this track. Drums were punchy but also characterful, tracking the complexity of the different drums well while cymbals strikes were relatively fragile, despite that slight spotlight giving the treble a tad of stridency at high volumes. Again, though, I saw this effect mostly at higher volumes and considering the price tag it was not a great problem.
Finally, I turned to Bluetooth and Marvin Gaye’s Mercy Mercy Me played as a MP3. Yamaha has implemented MP3 streaming well and the processing produced a pleasant and, considering the poor quality of the inherent file type, relatively sweet presentation that never grated or hurt the ears. Vocals were comparatively well rounded, avoiding the thin and edgy sound from other, less well realised, hardware.
Next up was the preamp, the WXC-50. For this test, I turned to ‘old technology’ and a pair of Class A power mono blocks. The small in stature but wholly meaty Valvet Classe-A Mono-amps A1r, to be precise. I’ve always enjoyed their open-ended and focused output and they have been used when shelf space has been lacking. As such, they pair up very well with the similarly low footprint WXC-50. Hooking up is easy with the A1r mono blocks sliding into the Pre Out sockets at the rear of the Yamaha chassis.
The reason for connecting the A1r blocks was to show that the Yamaha can connect to older hardware or hardware lacking in modern connective facilities. The thought of using the A1rs with a USB source and as part of a streaming set-up was an intriguing one.
I began with a slightly more traditional source, CD and back to Earth, Wind & Fire. The combination of the dynamic and high energy track, Let’s Groove, the bass rich Yamaha and the punchy A1r produced the sort of low end that can punch through brick walls and keep on going further than Godzilla in a bad mood. That, of course, is another benefit of the Yamaha preamp, you can tailor its musical personality, depending on what you connect to it. Yes, that slightly strident edge to the app mids was evident at higher volumes and during crescendos but, once more, at normal volumes it was no great concern.
Generally speaking, mids were insightful, detailed and with a slightly clinical edge that enabled the WXC-50 to dig deep into the mix to extract even the most subtle and shy of effects that often resided within the complex arrangement of this song. Solid state fans will adore the sound from the Yamaha, which could easily become a dictator of a small, wayward country, such is the measure of strength, power and no compromise approach it has to sound.
Turning to the USB port and Sonny Rollin’s higher resolution source via St. Thomas, the Yamaha successfully fed a relatively open and spacious signal, for the price, to the monoblocks. The result combined an energetic yet detailed output that was full of texture and character, especially from the Rollins saxophone while the percussion produced a musical and dynamic presentation, brimming with energy and motive power. Piano was a little strident at times but that was of no real surprise at this price point. The piano has to be the most difficult of instruments to control for any budget component and the Yamaha made a good fist of the chaotic and disorderly frequencies from it.
Finally, taking advantage of MusicCast and streaming Marvin Gaye’s Mercy Mercy Me from iPhone 6S I was once again impressed as to how the Yamaha delivered the low quality MP3 to the ear. That is, in a relatively mature, dignified and listenable manner. Tonal balance was pretty good for a MP3 while Gaye’s delivery was smooth and easy on the ear.
CONCLUSION
Both units offer an attractively small footprint that bodes well, obviously, if you are bereft of desk and shelf space. The little integrated amp offers just enough connections to satisfy most music fans. This little amp also offers a big sound: powerful and detailed for the low price it demands. Excellent value.
The preamp, meanwhile provides a goodly selection of features that is ideal to upgrade older technology or extend the facilities of a hi-fi system lacking in certain areas.
YAMAHA WXA-50 MUSICCAST WIRELESS STREAMING AMPLIFIER
Price: £430
Web: uk.yamaha.com/en
Tel: 01908 366700
GOOD: value for money, small footprint, focused bass, detailed mids
BAD: slight midrange stridency at high volumes, temperamental MusicCast app
RATING: 7
YAMAHA WXC-50 MusicCast Wireless Streaming Preamplifier
Price: £300
Web: uk.yamaha.com/en
Tel: 01908 366700
BAD: midrange stridency at high volumes, MusicCast app connection
RATING: 7
To watch of video of both units in action, click HERE.
REFERENCE SYSTEM
Apple iPhone 6S
Astell & Kern AK120 digital player
Leema Elements CD Player
Rega Brio-R amplifier
Spender S3/5R2 speakers
Acoustic Research Radiance One Speakers
Black Rhodium/Chord Shawline cables
Can anyone recommend what dac to buy im in between the new camebridge dag magic 200m the smsl su9 or s400 or the rme adi 2 dac. I would like to have mqa capapbilty and an hadphone out which bsically camebridge is going to fullfill. But i guess the others re better dacs. My cx-2 pre amp has enough power for my dt 1990 hedphones but i get fatiuge from them using the pre amp. I dont have the same issue on my motu m2. question is is the dac of the wxc50 hurting my ears or the headphone output of my yamaha pre amp which after manual putnout 4v into 68 ohms ( output level150 ohm) whatever that means.
Looks like im moving away from the wxc50 since orderd a matrix audio mini pro 3 today. I hope its gonba live up to the hype…
Hi,
This is Karan from India
I am using Edifier S880DB Active speakers with AUX, COAXIAL, OPTICAL USB and Bluetooth inputs,, i always prefer to stream from Spotify, but my only wireless connectivity in this speakers is Bluetooth, i thinking to buy Yamaha wxc-50, my connection aim is mobile to wxc-50 via Spotify connect(wireless) and optical or coaxial or aux to speaker(wired). is it work flawlessly or i need go some were else???
Hi Karan – as you can see by the review here, I didn’t have any Bluetooth issues. If you are unsure, please request a demo and try it with your phone.
I am a serious hires lover that’s why I didn’t love to hear wth bluetooth which is always with some loss, my idea is to go hires that’s why am think buy wxc which support hires with wireless connect to tidal or Spotify and one more thing my speaker also hires certified that’s also a reason I go for this option
How to connect WZC-50 to my Eon 615 Active Speakers ? Thanks
I’m afraid that I’m not at all familiar with the speakers so I can only guide you roughly here. Please check and confirm by doing our own manuals research before you connect everything up. I reckon you’ll need to run a cable from the RCA-socketed Aux outputs on the rear of the WXA-50 and plug the other end into the 6.35mm/balanced sockets on the rear of the speakers (those combi sockets on the rear). You’ll need to find a convertor cable to do that though. The JBL looks more like a studio/pro design to me rather than a home hifi design. Before you do that, you need to read through both manuals to confirm that I’m right and haven’t misunderstood anything.
It might be easier and less hassle to grab a pair of passive speakers, hooking those up to the WXA50 via speakers cables from the rear of the Yamaha.
Hey Paul thanks for your support.
I connected my active speakers (Genelec 8020D) to the Yamaha WXAC-50 from a male XLR (Genelec) to RCA (Yamaha). Anything I play via streaming plays full volume with no possibility to turn the volume down, it just blinks red on the WXAC-50. Do you know what I’m missing?
Thanks!
Louis
Let me ask Yamaha and see what it thinks.
Hi Louis – this just in from Yamaha: “Could we confirm the product, is it a WXA-50, WXC-50 or a WXAD-10? Please make sure pre amp mode is selected on the back of the WXC-50. If the customer is using a WXA-50, the AUX out will operate as full volume. If the customer has a WXAD-10 the variable output option is the 3.5mm jack. I hope this helps.”
Hi Paul. Nice to go through review and made me curious about various options WXC 50 provide. My bedroom setup is NAD 315 BEE amp driving PSB Alpha T1. For streaming I am using Apple Airport Express stereo output connected to NAD. I am streaming Apple lossless music through airplay. But thats it. Since WXC 50 has airplay will it be good idea to replace AE and NAD with it to directly drive PSB Alpha T1? What effect it may have on sound quality. Your guidance will help me. Thanks again
Assuming you can find a WXC-50 – they’re out of stock at the places I’ve looked – then sure, it’s definitely a low-price option. You will need to connect it to an amp, though.
Hello Paul, hope you dont mind a question quite so long after the review. I’ve been streaming through some pretty average kit. However I have an old pair of kef cresta 2’s so I thought it might be time to dust them off and get a new amp that can stream and even treat myself to a turntable. I was thinking the wxa-50 but with the analogue input going through the one of the dacs, would I be better off going with something else for my use case? If I go with your rule of paying double the cost of the amp for the turntable It would be a shame to not get the most out of the turntable if there is something more appropriate out there for a similar price.
Hi Rich – do you have a budget figure?
Hi Paul, I guess £450 Max. Do you think putting a turntable thru a amp like the wxa-50 would be a bad idea?
Hi Rich – so, in effect, you’re looking for a new turntable, amp and streamer – yes? I’d focus on one source for now to maximise your budget (i.e. either the turntable or streamer) plus the amp. So, for example, a Cambridge AXA35 amp plus a decent turntable like an Audio-Technica 120x or – for less – a Lenco L-3809 or, less still, a Pro-Ject Primary E. If the AXA35 is still out of stock then a AXA25 plus external phono amplifier like a Pro-Ject Phono Box MM. The streamer? An external model would offer better sound (just plug that into the rear of the amp). I’d look at iFi for the streamers.
Hello Paul just wanted to say thank you for taking the time to reply it was appreciated! Managing to get a musichall classic at a great price caused me to divert from your recommendations, additionally purchasing a wiim streamer, topping dac and for my sins a lovely vintage pioneer. I didn’t get the external phono stage as I had read the musichall built in one was very capable and Cambridge gear unfortunately is heavily marked up here in Australia.
Glad I can be of help, Rich. How you enjoy your system.
Hi Paul hope you can figure this out for me . I have caspian roksan intergrated and power amp mk1 with a pair of ruark prologue one speakers and blusound vault 2i . The intergrated amp is going back to roksan for a SERVICE SO I HAVE BAOGHT THE WXC TO RUN THE POWER AMP . I HAVE KEPT THE BLUESOUND AS THE STREAMER AND I HAVE BIWIRED THE SPEAKERS. AND THE SOUND IS FANTASTIC SO WHATS CHANGED . ANY IDEAS.
So it wasn’t as good before you shipped off your integrated?